L2TP VPN Client Configuration on pfSense Router

for KeepSolid VPN Unlimited® users

Check our comprehensive tutorial and figure out how to configure L2TP VPN client on your pfSense router. 

Important! Please note that you will need to configure your device using the generated settings by yourself at your own risk.

I. Get L2TP VPN configurations for pfSense router

 

First of all, you need to generate manual configuration files in your KeepSolid User Office. To do that, follow a few simple steps described in the tutorial How to manually create VPN configurations.

As you are going to configure L2TP protocol on your pfSense router, select the L2TP/IPsec option in the Protocol field.

II. Set up L2TP VPN client on your pfSense router

 

Once you get all the required VPN configurations, follow the steps described below.

1. Navigate to the Interfaces tab > AssignmentsPPPs and click +Add button.

2. Configure the next parameters as follows:

  • Link Type: choose L2TP
  • Link Interface(s): select WAN
  • Username: paste the Login from the user Office
  • Password: paste the Password from the user Office
  • IP/Gateway(em0): paste the Domain name from the user Office

Click Save.

3. Go to the Interface Assignments tab, select L2TP option for Available network ports and click +Add.

4. Click the OPT1 label.

5. Change the following parameters: 

  • Description: print VPNUnlimited
  • IPv4 Configuration Type: select L2TP

6. Check the Username and Remote IP address fields. 

7. Click Save.

8. Press Apply Changes.

9. Check Enable interface and press Save > Apply Changes.

10. Go to the System tab > Routing and select VPNUNLIMITED_L2TP for the Default gateway IPv4 option.

11. Click Save.

12. Press Apply Changes.

That’s it! You’ve successfully configured L2TP VPN connection on your pfSense router. In case you need to set up VPN on other devices, check out our Manuals page. If you need any assistance, please feel free to contact our customer support via [email protected].